# $Id: pnpdump.c,v 1.21 1999/12/09 22:28:33 fox Exp $
# Release isapnptools-1.21 (library isapnptools-1.21)
# 
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
# 
# For details of the output file format, see isapnp.conf(5)
# 
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
# 
# Compiler flags:  -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR
# (for   library:  -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR)
# 
# Trying port address 0273
# Board 1 has serial identifier 08 0f 6d b9 45 42 15 90 04

# (DEBUG)
(READPORT 0x0273)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING

# Card 1: (serial identifier 08 0f 6d b9 45 42 15 90 04)
# Vendor Id ADP1542, Serial Number 258849093, checksum 0x08.
# Version 1.0, Vendor version 1.0
# ANSI string -->Adaptec AHA-1542CP<--
#
# Logical device id ADP1542
#     Device capable of taking part in boot process
#     Device supports I/O range check register
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE ADP1542/258849093 (LD 0
#     ANSI string -->SCSI Host Adapter<--
#     Compatible device id PNP00a0
#     IRQ 9, 10, 11, 12, 14 or 15.
#         High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 9 (MODE +E)))
#     First DMA channel 0, 5, 6 or 7.
#         16 bit DMA only
#         Logical device is not a bus master
#         DMA may execute in count by byte mode
#         DMA may execute in count by word mode
#         DMA channel speed type A
# (DMA 0 (CHANNEL 0))

# Multiple choice time, choose one only !

#     Start dependent functions: priority preferred
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0330
#             Maximum IO base address 0x0330
#             IO base alignment 4 bytes
#             Number of IO addresses required: 4
# (IO 0 (SIZE 4) (BASE 0x0330) (CHECK))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0334
#             Maximum IO base address 0x0334
#             IO base alignment 4 bytes
#             Number of IO addresses required: 4
# (IO 0 (SIZE 4) (BASE 0x0334) (CHECK))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0234
#             Maximum IO base address 0x0234
#             IO base alignment 4 bytes
#             Number of IO addresses required: 4
# (IO 0 (SIZE 4) (BASE 0x0234) (CHECK))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0230
#             Maximum IO base address 0x0230
#             IO base alignment 4 bytes
#             Number of IO addresses required: 4
# (IO 0 (SIZE 4) (BASE 0x0230) (CHECK))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0134
#             Maximum IO base address 0x0134
#             IO base alignment 4 bytes
#             Number of IO addresses required: 4
# (IO 0 (SIZE 4) (BASE 0x0134) (CHECK))

#       Start dependent functions: priority functional
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0130
#             Maximum IO base address 0x0130
#             IO base alignment 4 bytes
#             Number of IO addresses required: 4
# (IO 0 (SIZE 4) (BASE 0x0130) (CHECK))

#     End dependent functions
#     Memory is non-writeable (ROM)
#     Memory is read cacheable, write-through
#     Memory decode supports high address
#     memory is 8-bit only
#     memory is shadowable
#     memory is an expansion ROM
#     Minimum memory base address 0x0c8000
#     Maximum memory base address 0x0dc000
#     Range base alignment mask 0xff4000 bytes
#     Range length 16384 bytes
# Choose UPPER = Range, or UPPER = Upper limit to suit hardware
# (MEM 0 (BASE 0x0c8000) (MODE bu) (UPPER 0x0cc000))
# (MEM 0 (BASE 0x0c8000) (MODE br) (UPPER 0x004000))
 (NAME "ADP1542/258849093[0]{SCSI Host Adapter   }")
# (ACT Y)
))
# End tag... Checksum 0x00 (OK)

# Returns all cards to the "Wait for Key" state
(WAITFORKEY)